Hitec's HS-485HB Karbonite Gear Standard Deluxe Servo
Hitec's HS-485HB Karbonite Gear Standard Deluxe Servo
HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With a top ball bearing, heavy duty, high impact Karbonite gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Specs
Size Category: | Standard |
Type: | Analog |
Application: | Helis and Aircraft up to 72” or up to 12lbs when using just one servo per control surface |
Torque: | 72 oz-in (5.2kg-cm) @ 4.8V; 89 oz-in (6.4kg-cm) @ 6V |
Speed: | 0.20 sec/60 deg @ 4.8V; 0.17 sec/60 deg @ 6V, at no load |
Length: | 1.57 in (40mm) |
Width: | 0.78 in (20mm) |
Height: | 1.49 in (38mm) |
Weight: | 1.59 oz (45 g) |
Bushing Or Bearing: | Bearing |
Bearing: | Single |
Motor Type: | 3 Pole |
Connector Type: | Universal |
Gear Material: | Karbonite |
Voltage: | 4.8V to 6.0V |
Technical Notes
Note: Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Search Terms: hs, hb, 485, hs485hb, bb, MMRADIO/ACCESSORY, MMRADIO/ACCESSORY, mmservos, lmsd2020