Overview

Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/7th scale Traxxas UDR vehicles

Key Features

• Designed for quick response, this system use a 3mm spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering
• HD 3mm sway bar tuning
• Aluminum sway bar arms h ave three mounting positions to fine tune the anti-sway bar
• Anti-sway bar arms and links are anodized red and Black fordurability, corrosion resista nce, and great looks Easy bolt-on application

Included

• (1) stiff spring steel torsion sway bar
• (2) aluminum anti-sway bar arms
• (2) aluminum anti-sway bar links
• (1) 3.1mm drill bit
• Mounting hardware , including screws, bushings, washers, spacers, and o-rings

Requirements

• Use the provided drill bit to enlarge the Sway-bar hole to 3mm
• Recommended to use a removable-type locking adhesive on s crews threading into metal
• Tighten setscrew that attaches anti-sway bar arm to the bar itself snugly, but not over-tight. Use a removable threadlock on the setscrew and check tightness regularly.