Darting.com
Radio Control
Model Trains
Slot Cars
TEKNO RC LLC NB48.4 1/8th Competition Nitro Buggy Kit
Price:
Sale Price:
$599.99
You Save:
$370.00
Manufacturer: TEKNO RC LLC
Key Features
- High downforce wing with hole guides included
- Easily adjust anti-squat, rear toe, front arm angle, front arm sweep, roll center, toe, camber, wheelbase, Ackerman, bump steer, suspension geometry out of the box
- Full set of option parts available
- Extremely easy to work on with minimal screw count
- All metric hex hardware
- Revised Steering Geometry and Ackerman Plate
- Bearing Supported Spindle/Carrier Design
- Revised Wide Rear Pivot Suspension Geometry
- Revised Ultra Efficient Drivetrain with New Universal Driveshafts
- Revised Internal Gear Ratio for Improved Efficiency
- CNC 4×1 9 Flat/Flat Delrin Pistons and CNC Delrin Guides
Needed to Complete
- 2-3 Channel Radio System
- High torque steering and brake servo (at least 300 oz/in)
- RX battery 58.5mm x 36mm x 34.5mm (L x W x H)
- Switch harness
- .21 nitro engine, tuned pipe, manifold, and glow plug
- Fuel bottle, fuel, 1/8th buggy starter box, and glow ignitor
- 1/8th scale buggy tires, wheels & CA glue
- Paint for body
What's in the box?
- (1) 1/8th 4WD Competition Nitro Buggy Kit
Specs
| Type: | Buggy |
| Scale: | 1/8 |
| Length: | 435mm (without wing) |
| Width: | 306-310*mm (*optional hubs required) |
| Wheelbase: | 323-335mm |
| Drivetrain: | 4WD |
| Motor or Engine: | .21 nitro engine, tuned pipe, manifold, and glow plug (sold separately) |
| Kit/RTR: | Kit |
| Fuel Tank Capacity: | 125cc, clunk |
| Minimum Age Recommendation: | 14 years |
Resources
Product Num:
TKR8300
